Home Products WLAN||wireless backbone AP6532||access point
Motorola AP6532
Wireless Access Point AP6532

AP6532

Der leistungsorientierte 802.11n AP6532 Dualfunk-WLAN-AccessPoint von Motorola bietet als Nachfolger des Dual-Radio AP5131 standardmäßig höhere Durchsatzraten und und natürlich ein zweites Funk-Modul, und nutzt gleichzeitig die WiNG 5-Intelligenz an der Netzwerkperipherie. Das zweite Funkmodul kann zur Bereitstellung eines WiFi-Zugangs oder als dedizierter Wireless-Sensor genutzt werden,

der sowohl das 2,4- als auch das 5-GHz-Band scannt, um die Zuverlässigkeit und Sicherheit des Netzwerks zu gewährleisten. Der AccessPoint arbeitet auch dann weiter, wenn die Verbindung zu einem lokalen oder entfernten Controller unterbrochen wird. Der AP 6532 kann als virtueller Controller fungieren und den Betrieb von bis zu 24 benachbarten Zugangspunkten des gleichen Typs für Mobilität und QoS-Dienste koordinieren.

 

Preisanfrage

 

 

 

Spezifikation

Datenblatt... (Herstellerlink)

Maße:

AP 6532 (interne Antenna)

9.5 in. L x 7.5 in. W x 1.7 in. H

24.13 cm L x 18.916 cm W x 4.36 cm H

AP 6532 (externe Antenne)

8.5 in. L x 5.6 in. W x 1.5 in. H

21.64 cm L x 14.10 cm W x 3.771 cm H


LED indicators: 2 LED mit mehrfachen Modi für 2.4GHz/5 GHz Activität, Power, Adoption und Errors


Netzwerk Standard: 802.11a, 802.11b, 802.11g, 802.11n

 

 

 

FAQ

Q: Welche Controller können die AP65xx Series APs im Adaptiv Mode managen?
A: Die AP65xx Series APs arbeiten mit jedem der RFS Series Switches: RFS4000, RFS6000, RFS7000, und auch ADSP und NX9000.

Q: Welche WiNG Version benötigen die AP 65xx Series APs?
A: Die AP 65xx Series APs werden mit WiNG 5.2 zusammenarbeiten.

Q: Können AccessPoints aus der 65xx Serie als AirDefense sensor arbeiten?
A: Ja. Sensor-Funktionalität wird realisiert durch AirDefense für den AP 65xx, darüberhinaus wird es noch mehr Funktionen geben, als sie der AP-5131 bot: erweiterte Spektralanalyse, Network Assurance und Wireless Vulnerability Assessment.

Q: I currently use a 802.3af PoE infrastructure, will I have to upgrade that to use the replacement products?
A: No. The AP 6532 & AP 6521 both are fully functional off of 802.3af power, no new power supplies or updated infrastructure is needed.

Q: Does SmartRF work with the AP 65xx series APs?
A: Yes, SmartRF for 11n rates and propagation will be rolled out on the AP 65xx series APs through 2011 in WiNG 5.2 and beyond.
Template #: SP-10875-72 rev. L Motorola Solutions Confidential Restricted Page 6 of 7
PMB2037 REV A PRP85432

Q: Can these replacement APs work both Independently and Adaptively?
A: Yes, the AP 6532 will be adaptive in it’s initial release (with WiNG 5.1) and all AP models will be both Adaptive as well as Independent as of the WiNG 5.2 release.

Q: What site-survivability is available when using the AP 6532 or AP 6521 adaptively?
A: Both models will allow full site survivability as of WiNG 5.1 for AP 6532 and WiNG 5.2 for AP 6521. No limit will be placed on how long the AP can operate without a switch.

Q: Is there a specific transition for the D-mode AP-51xx SKUs?
A: No, the WiNG 5 architecture does away with the concept of a D-Mode fat AP. As all ports will be capable of local bridging the AP 6532 and AP 6521 are the logical replacements. If local bridging is required without the need for site survivability, then the AP 650 or AP 621 should be considered.

Q: Welcher alte AP wird durch den AP6532 abgelöst?
A: Der AP5131 mit Dual Radio Option  wird im Prinzip durch den AP6532, und die Single Radio Option durch den AP6521 abgelöst.

Q: What about currently installed adaptive AP-5131 deployments?
A: While the AP-51xx architecture will not be migrated to WiNG 5.x, we will continue to support the WiNG 4.x code train through the support duration detailed above.

Q: Is the AP 6532 a Limited Lifetime Hardware Warranty device?
A: Yes, the AP 6532 is included in Motorola’s Limited Lifetime Hardware Warranty coverage.

Q: Is the AP-5181 also going EoS?
A: Yes, the AP-5181 EoS announcement can be found in PMB2038.

Zubehör

MTG-P65 für Motorola AP650 / AP6532

AP650 und MTG-S01 (auch für AP6532)
MTG-P65 - Halter für AP6532 ext. Antenne
Universell einsetzbar für AP6532 und AP650 !!!
Falls Sie sich für ein System mit dem leistungsfähigeren und aktuellen AP6532 entscheiden, können Sie den Montagerahmen verwenden. 
Der Montageaufwand verringert sich drastisch!
MTG-S01 - Halter für AP6532 int. Antenne
Universell einsetzbar für AP6532, AP300 oder AP650 mit interner Antenne! 
Falls Sie sich zuerst für ein System mit dem bewährten AP300 entscheiden, aber später auf den leistungsfähigeren und aktuelleren AP650 oder AP6532 umsteigen, können Sie die Montageschiene weiterverwenden. Der Montageaufwand verringert sich drastisch!

 

 
Home Products WLAN||wireless backbone AP6532||access point